Welcome to Vilaca Racing Time Attack Series,

Vilaca Racing Series is a non-wheel to wheel racing time attack event series taking place on various race tracks. Drivers are competing against the clock to see which car and driver is the fastest combination on the day.

The Vilaca Racing Series is about providing safe, spirited, fun and competitive track time for Novice and Advanced drivers.

It is open to all makes, models, all drive trains, turbo or aspirated, road and race cars

Vilaca Racing Series includes competitive classes for all degrees of tuning and modification. The classing is designed to place vehicles by drivetrain into classes based on similar modifications.

The above-mentioned drive train classes are divided into sub categories that will be clearly defined by subsequent labelled sections.

Our series is about safety, fun and family. Our simplified rules makes it easy to class each competitor in a class that will keep the racing series fair and competitive.

2024 will see the addition of some new classes, for a brief overview of the classes see bellow

1. General across all classes

1.1. Drivers

1.1.1. Be at least 18 years old and hold a current valid driver’s license

1.1.2. Complete and sign the required indemnity form/waivers and tech inspection form prior to driving in the event

1.1.3. Follow the rules set forth in this document, along with any rules given before or during the event by the event organizers

1.1.4. Have registered for the year and paid the registration fee in order to score championship points

1.1.5. Abide by the drivers dress code (see section 1.3.)

1.1.6. Vilaca Racing code of conduct

1.1.6.1. Any driver/crew shall abide by the rules in their entirety and in the spirit of which they are written. Any attempt to interpret the said rules to gain an unfair advantage will be penalized appropriately by the committee.

1.1.6.2. All persons shall conduct themselves in an orderly manner. Any disorderly conduct or any failure to obey official instructions or any breach of these regulations by entrants, drivers, or their assistants, shall make the entrant concerned liable to a penalty and/or fine. All participants must play within the rules and respect race officials and their decisions.

1.1.6.3. All participants must respect the rights, dignity, and value of their fellow participants regardless of gender, ability, physical appearance, cultural background, or religion. All participants must always encourage and take responsibility for their actions.

1.1.6.4. All participants must ensure their equipment is safe and race worthy, prior to taking part in training, testing or race events. Only approved racewear (e.g.: helmet, gloves, race boots and suit) to be used by the driver, according to the regulations. It is the participants own responsibility to identify and measure his/her own skill level against his/her competitors, and take responsibility for the risks associated with training, testing and or racing. It should be noted that a basic level of competence is required.

1.1.6.5. It is the participant’s responsibility to declare, prior to any participation in training, testing, or racing, of any medical condition or medication required that may be relevant in the event of an emergency.

1.1.6.6. All participants are required to display courtesy and etiquette to other members and participants in training, testing and race events. Any disputes or problems that may arise during an event must be addressed in a respectful manner, to the correct person (official) at the event.

1.1.6.7. The safety of children within the sport is a priority. Knowledge of the code of ethics surrounding care of children in sports will be promoted and encouraged. It is the participant’s own responsibility to ensure the safety of children at training, testing, or racing events.

1.1.6.8. When taking part in any event, it is the responsibility of the driver to take the time to read and fully understand the posted rules, regulations and conditions for said event prior to start time, thus eliminating unnecessary delays at the beginning of the event. Requests for clarification of these rules, regulations, or conditions, should be asked in the drivers meeting held before each event.

1.1.6.9. All participants must have respect for the environment and the surrounding inhabitants. Responsibility must be taken to reduce excessive noise and keep all areas that are used as clean and pollution free as possible.

1.1.6.10. All participants must respect that drugs and alcohol are strictly prohibited at training, testing and races. It is an offence and will not be tolerated. Offenders will be excluded from the event and face further disciplinary action.

1.1.6.11. Any abusive comments on social media (Facebook, Twitter etc.) between teams, competitors, officials, organizers, will be held responsible and liable for their actions.

1.1.6.12. If the offence occurs during an event race, the car and driver concerned may be excluded from the race, or entire event and/or a penalty and/or a fine may be imposed. Failure to report at a specified time shall be a breach of the regulations and may be subject to a penalty and/or a fine.

1.1.6.13. Wild or disorderly driving shall be subject to exclusion.

1.1.6.14. Any proceeding, derogatory action, or interference with or against a race official by entrants, drivers, or their assistants shall result in a ban from the event and/or series

1.1.6.15. Abuse of officials will not be tolerated and offenders will be removed from the event and subject to further legal action.

1.1.7. Any driver who is involved in an incident shall follow the instructions of the safety team without question and will not be allowed to return to competition without the approval of the Vilaca Racing staff.

1.2. All drivers must have an understanding of the following:

1.2.1. Flags. General flag rules will be observed. Flag rules will be gone over in the race group drivers meeting at the start of the event. Track Flags which may vary per facility, will be covered at drivers meeting. Please see addendum A for reference

1.2.2. Pay attention to and follow the flags. Flags and their meanings will be demonstrated at the driver’s meetings

1.2.3. A firm “black flag” rule will be instituted at all Vilaca racing events. Dangerous driving such as regular off-track excursions, reckless driving leading to poor or out of control car control and/or creating dangerous conditions for other competitors will be monitored by the track officials and Vilaca Racing Committee. Offenders will be black flagged and have to be cleared before they can be allowed back on the track.

1.2.4. Follow the given dress code for the event

1.2.5. Driver and passenger arms and hands must remain inside the vehicle at all times

1.2.6. If a driver notices something is wrong with their car while on track, every effort should be made to pull off the track immediately, in a safe and predictable manner.

1.2.7. Any and all unsafe and reckless/out of control driving that is seen by participants is asked to be reported Vilaca Racing staff.

1.2.8. Track Rules

The track rules are subject to change without notice and may differ from track to track. These changes to the track will only be made if necessary for the safety of the drivers and/or spectators.

1.2.8.1. No burnouts / spinning / drifting allowed

1.2.8.2. Pit lane / pit parking lot speed is a walking pace

1.2.8.3. No excessive revving allowed

1.2.8.4. No open fires allowed

1.2.9. Contact on track is deemed unacceptable. All cars participating in the series must be driven in such a manner that they do not make contact other cars on track.

1.2.10. Contact with walls or barriers or other cars will result in the driver being parked for the remainder of the day unless the car has been passed by the tech inspector and is safe to do so. These events cannot continue without the safe driving of the participants being the highest priority for all involved

1.2.11. Contact in any detrimental way to the walls, barriers, tyre walls, or other structures of the racetrack or paddock that cause damage deemed to need repair (by the track management), may result in the driver or owner of the car causing the damage to be billed for repairs.

1.2.12. Stopping on track. Coming to a complete stop on track is prohibited if at all possible. A full-stop vehicle will automatically result in a red flag situation for all cars in the area of the stopped vehicle or on the entire racetrack. If a car needs to stop on track, please stop in a safe location not on a blind spot or a corner exit, and drivers may only exit the vehicle if given the permission of the marshal. It is strongly advised not to stop any vehicle on tall, dry grasses, as fire and inevitable vehicle damage will likely occur. If the vehicle is on fire, the driver may exit as soon as possible.

1.3. Safety

1.3.1. Dress code

Each participant will receive a driver’s dress code via email and/or message. The bellow dress code is a guideline but not limited to the list bellow;

1.3.1.1. All drivers and passengers are required to wear a helmet at all times on circuit

1.3.1.2. Long pants only, no shorts on track.

1.3.1.3. Open wheel / convertible cars long sleeve tops/jackets only

1.3.1.4. Racing suits are highly encouraged on track for street cars

1.3.1.5. Race cars / Super Class cars may only be allowed on track with a Race Suit

1.3.1.6. Shoes must be closed-toe. No sandals.

1.3.1.7. No tank tops

1.3.2. Passengers are allowed in participants’ cars;

1.3.2.1. Passengers must follow the given drivers dress code

1.3.2.2. Must be medically fit to do so

1.3.2.3. Indemnity forms are completed

1.3.2.4. This is a privilege, not a right, and can be revoked

1.3.2.5. Passengers are allowed in cars at the determination of the Vilaca Racing staff. Please know as a driver of a car with a passenger that you are taking on a great responsibility. Safety of both occupants of a vehicle is of utmost importance

1.3.3. Minimum OEM safety belts are compulsory. Four or Five-point harnesses with a HANS device/neck brace are strongly recommended for all classes and compulsory for Race Cars.

1.3.4. Fire Extinguishers

The size of the fire extinguisher must be more than 1.5kg and be securely fastened by means of a steel bracket and a minimum of 2 x M5 bolts (cable ties, duct tape and Velcro will not be passed)

The correct fire extinguisher must be fitted to the car (fire extinguisher class B, C, BC or ABC)

Fire extinguishers are strongly recommended for all classes and compulsory in the following circumstances;

1.3.4.1. Race Cars

1.3.4.2. Ethanol fuelled cars

1.3.4.3. Water methanol fuelled cars

2. 2024 Classes

The below list(s) refer to the class restrictions and/or requirements. This does not include the basic inspection of the vehicle that the vehicle will undergo in order to be classed correctly and/or pass inspection

2.1. Classing of Street, Modified, Super and Unlimited Classes will be detailed in section 3.

The classes will only be valid if the following requirements are met for each class:

2.1.1. Minimum amount of registered competitors is 8 or more

2.1.2. Each event has a minimum of 5 entries per class

Should the above minimum requirements for each class not be met by the close of registration the relevant classes will be combined:

2.1.2.1. Street xWD and Modified xWD will form Street Modified XWD

2.1.2.2. Super FWD, 4WD & RWD will form Super Class

2.2. All vehicles in Street, Modified and Super must be production road cars. Street and Modified cars need to be road legal and licensed. All vehicles need to pass the inspection report (see section 4)

2.3. Class exemptions

2.3.1. Road Super Cars are exempted from entering both Street and Modified Classes, however classification on a ‘super car’ will be dealt on an individual basis

2.3.1.1. High performance vehicles such as; but not limited to;

2.3.1.1.1. Porsche 911/Cayman Turbo, GT3, GT2, GTS, R, etc.

2.3.1.1.2. Mercedes GTS, GTR

2.3.1.1.3. Nissan Skyline GTR R35

2.3.1.1.4. Noble M10, M12, M400, M15, M600 etc.

2.3.1.1.5. Ferrari 360,458,488 etc.

2.3.1.1.6. McLaren 540c, 570s, 650s, 720s, LT models etc.

2.3.1.1.7. Audi R8, Lamborghini etc.

2.3.2. Race super cars and/or tubular chassis cars are exempted from entering Street, Modified and Super classes and will be placed into an Unlimited Class

2.3.2.1. Vehicles such as

2.3.2.1.1. GT Race cars (Ferrari, Porsche, Lamborghini, etc)

2.3.2.1.2. KTM X-Bow, Ariel Atom etc.

2.3.2.1.3. Production Tubular chassis / kit cars (i.e. Lotus 7)

2.4. Car changing / swopping for an Event and / or Season

The competitor is allowed to changed his/her vehicle under the following circumstances but not limited to:

2.4.1. The driver sends a notification in wiring with his/her intent to use another vehicle with reasoning.

2.4.2. The car replaced is of the same class and drive train as originally entered. i.e., Golf 5 GTI to a Golf 7 GTI.

2.4.3. Change of vehicle drive train from registered vehicle is allowed but will result in moving class with no points carried over.

2.4.3.1. Should the vehicle not qualify for the original registered class the points accumulated will not be allowed to carry over (i.e., Street to Modified and/or xWD to zWD)

2.4.4. Vehicle changes/swopping is allowed once in the championship year, thereafter the penalty will result in a 1 (one) place class penalty and 3 place overall penalty at each event.

2.4.5. A Permanent vehicle change for a remainder of the season for special cases such as the registered vehicle be sold, broken for an extended period of time, accident damage, etc. The penalty will be a single event 2 (two) class and 4 (four) place penalty and will be reviewed by the committee. Provided the replacement vehicle is entered for the remainder of the season.

2.5. Numbers & decals

2.5.1. Numbers and sponsor decals

Race numbers and sponsor decals will be given 1 (one) set of decals for the year. Decals must be displayed in the appropriate manor – see picture bellow. Stickers may be applied to magnets and then be place on the vehicle. Failure to display the provided decals/correct number and/or modifying the decals in any way without the consent of the committee (i.e., cutting out the race number) will result in the following outcome

2.5.1.1. Driver will not be allowed to compete at the event

Should you require a new set of stickers for each event and/or a replacement set you may arrange with the committee at an additional fee to the event entry fee. This will be enforced before the day starts

3. TRANSPONDERS, TIME KEEPER, TIMIING

3.1. Transponders

3.1.1. Transponders will be handed out by the official time keeper in the morning of the event before drivers briefing.

3.1.2. Transponders are to be fitted to the vehicle inside or outside as shown in the graphic bellow

3.1.3. The transponder remains the responsibility of the participant for the duration of the event. Any damage incurred caused by an accident or the transponder falling off the vehicle is for the participant’s account.

3.2. Time keeper

3.2.1. The time keeper is not to be interrupted during the event

3.2.2. The time keeper is not permitted to disclose any event unofficial results during the course of the event.

3.3. Timing

3.3.1. Only lap times that are recorded by a transponder will count towards the days results

3.3.2. Only in a special circumstance will manual timing be accepted such as but not limited to;

3.3.2.1. Timing beacon is damaged

3.3.2.2. Interference with the timing line

3.3.2.3. Transponder battery failure

3.3.2.4. Shortage of replacement transponders

4. Protest / Complaints / objections

4.1. The right to protest

The right to protest lies solely with any participant or official who may consider himself/herself rightfully aggrieved by any decision, act or omission of an organiser, official, competitor or driver.

4.2. Lodging a protest

4.2.1. A protest to be considered by the committee, can be lodged directly with the Official Time Keeper or the Clerk of the Course

4.2.2. Every protest shall be in writing, stating the name and address of the protestor, the grounds for the protest, be signed by the competitor making the protest,

4.3. Time limit for protest

All protests must be lodged by the end of the final session of the day or 30min prior to prize giving. After this time has lapsed no protest will be considered.

4.4. All protests be accompanied by a fee of R500.00 to the Vilaca Racing associated charity either by means of an EFT or cash payment – non-refundable regardless of the outcome.

4.5. Action by the committee on receipt of a protest.

4.5.1. They shall consider all protests as urgent. They shall take steps as soon as possible to convene a hearing.

4.5.2. Once a hearing has taken place the committee decision is final and cannot be appealed or overturned.

5. FRONT WHEEL DRIVE TRAIN CLASSES (FWD)

5.1. Street FWD Class

Street FWD Class is defined by the following rules

5.1.1. Motor

5.1.1.1. All Naturally Aspirated (N/A) Motors

5.1.1.2. Forced induction (FI) motor combinations under 1900cc

5.1.1.3. Engine Modifications will remain open with the exception of the following:

5.1.1.3.1. No aftermarket turbo charges may be fitted

5.1.1.3.2. No Nitrous Oxide may be fitted

5.1.1.3.3. No Super chargers may be fitted

5.1.1.3.4. Motor swops/changes will be allowed under the following conditions

5.1.1.3.4.1. N/A cars motors are replaced with N/A car motors (e.g., 1400cc may be changed to a 2000cc motor, regardless of the make provided 2.1.1.3.1 to 2.1.1.3 is not contravened)

5.1.1.3.4.2. Turbo car motors are replaced with a like for like engine – failure to do so will result in moving to Modified FWD.

5.1.1.4. The above rules (2.1.1.1 – 2.1.1.3) will apply to both petrol and diesel cars

5.1.2. Tyres

5.1.2.1. Tyre size will be limited to a maximum width of 225. This will be calculated by the following : ((Front Tyre Width) + (Rear Tyre Width)) / 2 = XXX Tyre width

5.1.2.2. Road tyres and semi slick tyres are permitted

5.1.2.3. NO slick tyres permitted

5.1.2.4. Semi slick tyres that are permitted must be readily available for every competitor to use in a range of sizes.

5.1.2.5. No special import tyres and/or vehicle specific tyres are allowed. Tyres with low or no tread, cords or steel belts showing or obvious leaks and/or punctures are not allowed on track

5.1.3. Interior

5.1.3.1. Interior must remain stock and intact/untouched with the only exceptions:

5.1.3.1.1. Changing the OEM driver and passenger seat to fit a sport/bucket seat and/or the fitment of approved safety harnesses is allowed

5.1.3.1.2. Modification to the vehicle interior to accommodate the fitment of a roll cage and/or half cage is permitted. Only the removal of the rear seats will be allowed to accommodate this safety upgrade. Door panels and all non-interference interior trim must remain installed.

5.1.3.2. Items that may be removed from the interior:

5.1.3.2.1. Spare wheel

5.1.3.2.2. Jack

5.1.3.2.3. Wheel spanner

5.1.3.2.4. Tool kit

5.1.3.2.5. Loose objects in the car

Any removal of items other than specified in the list and/or partial removal of the OEM interior will result in the vehicle moving to SuperClass B. Removal of interior panels after tech inspection will result in disqualification and no points will be awarded.

5.1.4. Exterior

5.1.4.1. Cosmetic modifications/additional cosmetic spoilers/revised bumper designs are permitted

5.1.4.2. Aggressive aero-enhancing modifications will be reviewed by the technical committee and if deemed to offer significant performance enhancements – the vehicle will be moved to Modified FWD or Super FWD, whichever deemed appropriate by the Vilaca Racing Committee.

5.1.4.3. Front splitters / splash guards/ under trays / engine covers – aftermarket products may be used provided they do not extend past the front bumper by more than 100mm.

5.1.4.4. Rear diffusers / splash guards / under trays / covers – aftermarket products may be used provided they do not extend past the rear bumper by more than 100mm.

5.1.4.5. Wide body kits are accepted but conditional that they do not provide a performance advantage and will be subject to the approval of the technical committee

5.1.5. Brake upgrade

5.1.5.1. Minimum of four-wheel brakes required.

5.1.5.2. No limitation on brake upgrades

5.1.5. Suspension

5.1.5.1. No limitation on upgrades provided the following remains unchanged

5.1.5.1.1. OEM geometry

5.1.5.1.2. Sub frame

5.1.5.1.3. Chassis legs

5.1.5.1.4. Mounting points – Upgrading an existing fixture of the OEM body structure to a tubular chassis section (front or rear) will result the car moving to Superclass

5.1.5.2. The following upgrades are permitted

5.1.5.2.1. Camber arms / plates

5.1.5.2.2. Caster arms/ bushes

5.1.5.2.3. Upgraded struts / Coil overs

5.1.5.2.4. Sway bars

5.1.5.2.5. Bushes

5.1.5.2.6. Linkages

Changes to the vehicle that are outside these guidelines will be discussed with the technical committee for clarification on classing.

5.1.6. Fueling and Fluids

Fueling of cars should be done in proper areas, with adequate measures for safety, and from approved containers. Fire extinguishers shall be present and in a readily accessible location during any refueling from containers.

5.1.6.1. Pump fuel and race fuel is allowed

5.1.6.2. Fuel additives are allowed

5.1.6.3. Ethanol fueled cars are allowed

5.1.6.4. Water methanol injection kits are allowed

5.1.6.5. No methanol fueled cars will be allowed

5.1.7. Other

Modifications that are not covered by the subsequent sections on the vehicle that substitutes an OEM part will result in the vehicle moving up to the relevant super class that includes but is not limited to

5.1.7.1. Fuel cells

5.1.7.2. Relocated suspension points

5.1.7.3. Lexan/Polycarbonate windows

5.1.7.4. Perspex as a window material is prohibited under all conditions.

5.2. Modified FWD Class

Modified FWD Class is defined by the following rules

5.2.1. Engine modifications

5.2.1.1. All Naturally Aspirated (N/A) Motors

5.2.1.2. Forced induction (FI) motor combinations

5.2.1.3. Engine Modifications will remain open which includes the following:

5.2.1.3.1. Aftermarket turbo charges may be fitted

5.2.1.3.2. Nitrous Oxide may be fitted only to N/A motors

5.2.1.3.3. Super chargers may be fitted

5.2.2. Tyres

5.2.2.1. Tyre size will be limited to a maximum width of 265. This will be calculated by the following: ((Front Tyre Width) + (Rear Tyre Width)) / 2 = XXX Tyre width

5.2.2.2. Road tyres and Semi slick tyres are permitted

5.2.2.3. NO slick tyres permitted

5.2.2.4. Semi slick tyres that are permitted must be readily available for every competitor to use in a range of sizes

5.2.2.5. No special import tyres and/or vehicle specific tyres are allowed. Tyres with low or no tread, cords or steel belts showing or obvious leaks and/or punctures are not allowed on track

5.2.3. Interior

5.2.3.1. Interior must remain stock and intact/untouched with the only exceptions:

5.2.3.1.1. Changing the OEM driver and passenger seat to fit a sport/bucket seat and/or the fitment of approved safety harnesses is allowed

5.2.3.1.2. Modification to the vehicle interior to accommodate the fitment of a roll cage and/or half cage is permitted. Only the removal of the rear seats will be allowed to accommodate this safety upgrade. Door panels and all non-interference interior trim must remain installed

5.2.3.1.3. Items that may be removed from the interior:

5.2.3.1.3.1. Spare wheel

5.2.3.1.3.2. Jack

5.2.3.1.3.3. Wheel spanner

5.2.3.1.3.4. Tool kit

5.2.3.1.3.5.Loose objects in the car

Any removal of items other than specified in the list and/or partial removal of the OEM interior will result in the vehicle moving to Super FWD. Removal of interior panels after tech inspection will result in disqualification and no points will be awarded.

5.2.4. Exterior

5.2.4.1. Cosmetic modifications/additional cosmetic spoilers/revised bumper designs are permitted

5.2.4.2. Aggressive aero-enhancing modifications will be reviewed by the technical committee and if deemed to offer significant performance enhancements – the vehicle will be moved to SuperClass, whichever deemed appropriate by the Vilaca Racing Committee.

5.2.4.3. Front splitters / splash guards/ under trays / engine covers – aftermarket products may be used provided they do not extend past the front bumper by more than 100mm

5.2.4.4. Rear diffusers / splash guards / under trays / covers – aftermarket products may be used provided they do not extend past the rear bumper by more than 100mm

5.2.5. Brake upgrade

5.2.5.1. Minimum of four-wheel brakes required

5.2.5.2. No limitation on brake upgrades

5.2.6. Suspension

5.2.6.1. No limitation on upgrades provided the following remains unchanged

5.2.6.1.1. OEM geometry

5.2.6.1.2. Sub frame

5.2.6.1.3. Chassis legs

5.2.6.1.4. Mounting points – Upgrading an existing fixture of the OEM body structure to a tubular chassis section (front or rear) will result the car moving to Superclass

5.2.6.2. The following upgrades are permitted

5.2.6.2.1. Camber arms / plates

5.2.6.2.2. Caster arms/ bushes

5.2.6.2.3. Upgraded struts / Coil overs

5.2.6.2.4. Sway bars

5.2.6.2.5. Bushes

5.2.6.2.6. Linkages

Changes to the vehicle that are outside these guidelines will be discussed with the technical committee for clarification on classing

5.2.7. Fueling and Fluids

5.2.7.1. Pump fuel and race fuel is allowed

5.2.7.2. Fuel additives are allowed

5.2.7.3. Ethanol fueled cars are allowed

5.2.7.4. Water methanol injection kits are allowed

5.2.7.5. No methanol fueled cars will be allowed

5.2.8. Other

5.2.8.1. Fuel cells

5.2.8.2. Relocated suspension points

5.2.8.3. Lexan/Polycarbonate windows

5.2.8.3.1. Perspex as a window material is prohibited under all conditions

6. Rear Wheel Drive Classes (RWD)

6.1. Street RWD Class

Street RWD Class is defined by the following rules

6.1.1. Motor

6.1.1.1. All Naturally Aspirated (N/A) Motors

6.1.1.2. Forced induction (FI) motor combinations under 1900cc

6.1.1.3. Engine Modifications will remain open with the exception of the following:

6.1.1.3.1. No aftermarket turbo charges may be fitted

6.1.1.3.2. No Nitrous Oxide may be fitted

6.1.1.3.3. No Super chargers may be fitted

6.1.1.3.4. Motor swops/changes will be allowed under the following conditions

6.1.1.3.4.1. N/A cars motors are replaced with N/A car motors (e.g., 1400cc may be changed to a 2000cc motor, regardless of the make provided 2.1.1.3.1 to 2.1.1.3 is not contravened)

6.1.1.3.4.2. Turbo car motors are replaced with a like for like engine – failure to do so will result in moving to Modified FWD.

6.1.1.4. The above rules (2.1.1.1 – 2.1.1.3) will apply to both petrol and diesel cars

6.1.2. Tyres

6.1.2.1. Tyre size will be limited to a maximum width of 245. This will be calculated by the following : ((Front Tyre Width) + (Rear Tyre Width)) / 2 = XXX Tyre width

6.1.2.2. Road tyres and semi slick tyres are permitted

6.1.2.3. NO slick tyres permitted

6.1.2.4. Semi slick tyres that are permitted must be readily available for every competitor to use in a range of sizes.

6.1.2.5. No special import tyres and/or vehicle specific tyres are allowed. Tyres with low or no tread, cords or steel belts showing or obvious leaks and/or punctures are not allowed on track

6.1.3. Interior

6.1.3.1. Interior must remain stock and intact/untouched with the only exceptions:

6.1.3.1.1. Changing the OEM driver and passenger seat to fit a sport/bucket seat and/or the fitment of approved safety harnesses is allowed

6.1.3.1.2. Modification to the vehicle interior to accommodate the fitment of a roll cage and/or half cage is permitted. Only the removal of the rear seats will be allowed to accommodate this safety upgrade. Door panels and all non-interference interior trim must remain installed.

6.1.3.2. Items that may be removed from the interior:

6.1.3.2.1. Spare wheel

6.1.3.2.2. Jack

6.1.3.2.3. Wheel spanner

6.1.3.2.4. Tool kit

6.1.3.2.5. Loose objects in the car

6.1.4. Exterior

6.1.4.1. Cosmetic modifications/additional cosmetic spoilers/revised bumper designs are permitted

6.1.4.2. Aggressive aero-enhancing modifications will be reviewed by the technical committee and if deemed to offer significant performance enhancements – the vehicle will be moved to Modified FWD or Super FWD, whichever deemed appropriate by the Vilaca Racing Committee.

6.1.4.3. Front splitters / splash guards/ under trays / engine covers – aftermarket products may be used provided they do not extend past the front bumper by more than 100mm.

6.1.4.4. Rear diffusers / splash guards / under trays / covers – aftermarket products may be used provided they do not extend past the rear bumper by more than 100mm.

6.1.4.5. Wide body kits are accepted but conditional that they do not provide a performance advantage and will be subject to the approval of the technical committee

6.1.5. Brake upgrade

6.1.5.1. Minimum of four-wheel brakes required.

6.1.5.2. No limitation on brake upgrades

6.1.5. Suspension

6.1.5.1. No limitation on upgrades provided the following remains unchanged

6.1.5.1.1. OEM geometry

6.1.5.1.2. Sub frame

6.1.5.1.3. Chassis legs

6.1.5.1.4. Mounting points – Upgrading an existing fixture of the OEM body structure to a tubular chassis section (front or rear) will result the car moving to Superclass

6.1.5.2. The following upgrades are permitted

6.1.5.2.1. Camber arms / plates

6.1.5.2.2. Caster arms/ bushes

6.1.5.2.3. Upgraded struts / Coil overs

6.1.5.2.4. Sway bars

6.1.5.2.5. Bushes

6.1.5.2.6. Linkages

Changes to the vehicle that are outside these guidelines will be discussed with the technical committee for clarification on classing.

6.1.6. Fueling and Fluids

6.1.6.1. Pump fuel and race fuel is allowed

6.1.6.2. Fuel additives are allowed

6.1.6.3. Ethanol fueled cars are allowed

6.1.6.4. Water methanol injection kits are allowed

6.1.6.5. No methanol fueled cars will be allowed

6.1.7. Other

6.1.7.1. Fuel cells

6.1.7.2. Relocated suspension points

6.1.7.3. Lexan/Polycarbonate windows

6.1.7.4. Perspex as a window material is prohibited under all conditions.

6.2. Modified RWD Class

Modified RWD Class is defined by the following rules

6.2.1. Engine modifications

6.2.1.1. All Naturally Aspirated (N/A) Motors

6.2.1.2. Forced induction (FI) motor combinations

6.2.1.3. Engine Modifications will remain open which includes the following:

6.2.1.3.1. Aftermarket turbo charges may be fitted

6.2.1.3.2. Nitrous Oxide may be fitted only to N/A motors

6.2.1.3.3. Super chargers may be fitted

6.2.2. Tyres

6.2.2.1. Tyre size will be limited to a maximum width of 265. This will be calculated by the following: ((Front Tyre Width) + (Rear Tyre Width)) / 2 = XXX Tyre width

6.2.2.2. Road tyres and Semi slick tyres are permitted

6.2.2.3. NO slick tyres permitted

6.2.2.4. Semi slick tyres that are permitted must be readily available for every competitor to use in a range of sizes

6.2.2.5. No special import tyres and/or vehicle specific tyres are allowed. Tyres with low or no tread, cords or steel belts showing or obvious leaks and/or punctures are not allowed on track

6.2.3. Interior

6.2.3.1. Interior must remain stock and intact/untouched with the only exceptions:

6.2.3.1.1. Changing the OEM driver and passenger seat to fit a sport/bucket seat and/or the fitment of approved safety harnesses is allowed

6.2.3.1.2. Modification to the vehicle interior to accommodate the fitment of a roll cage and/or half cage is permitted. Only the removal of the rear seats will be allowed to accommodate this safety upgrade. Door panels and all non-interference interior trim must remain installed

6.2.3.1.3. Items that may be removed from the interior:

6.2.3.1.3.1. Spare wheel

6.2.3.1.3.2. Jack

6.2.3.1.3.3. Wheel spanner

6.2.3.1.3.4. Tool kit

6.2.3.1.3.5.Loose objects in the car

6.2.4. Exterior

6.2.4.1. Cosmetic modifications/additional cosmetic spoilers/revised bumper designs are permitted

6.2.4.2. Aggressive aero-enhancing modifications will be reviewed by the technical committee and if deemed to offer significant performance enhancements – the vehicle will be moved to SuperClass, whichever deemed appropriate by the Vilaca Racing Committee.

6.2.4.3. Front splitters / splash guards/ under trays / engine covers – aftermarket products may be used provided they do not extend past the front bumper by more than 100mm

6.2.4.4. Rear diffusers / splash guards / under trays / covers – aftermarket products may be used provided they do not extend past the rear bumper by more than 100mm

6.2.5. Brake upgrade

6.2.5.1. Minimum of four-wheel brakes required

6.2.5.2. No limitation on brake upgrades

6.2.6. Suspension

6.2.6.1. No limitation on upgrades provided the following remains unchanged

6.2.6.1.1. OEM geometry

6.2.6.1.2. Sub frame

6.2.6.1.3. Chassis legs

6.2.6.1.4. Mounting points – Upgrading an existing fixture of the OEM body structure to a tubular chassis section (front or rear) will result the car moving to Superclass

6.2.6.2. The following upgrades are permitted

6.2.6.2.1. Camber arms / plates

6.2.6.2.2. Caster arms/ bushes

6.2.6.2.3. Upgraded struts / Coil overs

6.2.6.2.4. Sway bars

6.2.6.2.5. Bushes

6.2.6.2.6. Linkages

Changes to the vehicle that are outside these guidelines will be discussed with the technical committee for clarification on classing

6.2.7. Fueling and Fluids

6.2.7.1. Pump fuel and race fuel is allowed

6.2.7.2. Fuel additives are allowed

6.2.7.3. Ethanol fueled cars are allowed

6.2.7.4. Water methanol injection kits are allowed

6.2.7.5. No methanol fueled cars will be allowed

6.2.8. Other

6.2.8.1. Fuel cells

6.2.8.2. Relocated suspension points

6.2.8.3. Lexan/Polycarbonate windows

6.2.8.3.1. Perspex as a window material is prohibited under all conditions

7. Four (4) Wheel Drive Classes (4WD)

7.1. Modified 4WD Class

Modified 4WD Class is defined by the following rules

7.2.1. Engine modifications

7.2.1.1. All Naturally Aspirated (N/A) Motors

7.2.1.2. Forced induction (FI) motor combinations

7.2.1.3. Engine Modifications will remain open which includes the following:

7.2.1.3.1. Aftermarket turbo charges may be fitted

7.2.1.3.2. Nitrous Oxide may be fitted only to N/A motors

7.2.1.3.3. Super chargers may be fitted

7.2.2. Tyres

7.2.2.1. Tyre size will be limited to a maximum width of 265. This will be calculated by the following: ((Front Tyre Width) + (Rear Tyre Width)) / 2 = XXX Tyre width

7.2.2.2. Road tyres and Semi slick tyres are permitted

7.2.2.3. NO slick tyres permitted

7.2.2.4. Semi slick tyres that are permitted must be readily available for every competitor to use in a range of sizes

7.2.2.5. No special import tyres and/or vehicle specific tyres are allowed. Tyres with low or no tread, cords or steel belts showing or obvious leaks and/or punctures are not allowed on track

7.2.3. Interior

7.2.3.1. Interior must remain stock and intact/untouched with the only exceptions:

7.2.3.1.1. Changing the OEM driver and passenger seat to fit a sport/bucket seat and/or the fitment of approved safety harnesses is allowed

7.2.3.1.2. Modification to the vehicle interior to accommodate the fitment of a roll cage and/or half cage is permitted. Only the removal of the rear seats will be allowed to accommodate this safety upgrade. Door panels and all non-interference interior trim must remain installed

7.2.3.1.3. Items that may be removed from the interior:

7.2.3.1.3.1. Spare wheel

7.2.3.1.3.2. Jack

7.2.3.1.3.3. Wheel spanner

7.2.3.1.3.4. Tool kit

7.2.3.1.3.5.Loose objects in the car

7.2.4. Exterior

7.2.4.1. Cosmetic modifications/additional cosmetic spoilers/revised bumper designs are permitted

7.2.4.2. Aggressive aero-enhancing modifications will be reviewed by the technical committee and if deemed to offer significant performance enhancements – the vehicle will be moved to SuperClass, whichever deemed appropriate by the Vilaca Racing Committee.

7.2.4.3. Front splitters / splash guards/ under trays / engine covers – aftermarket products may be used provided they do not extend past the front bumper by more than 100mm

7.2.4.4. Rear diffusers / splash guards / under trays / covers – aftermarket products may be used provided they do not extend past the rear bumper by more than 100mm

7.2.5. Brake upgrade

7.2.5.1. Minimum of four-wheel brakes required

7.2.5.2. No limitation on brake upgrades

7.2.6. Suspension

7.2.6.1. No limitation on upgrades provided the following remains unchanged

7.2.6.1.1. OEM geometry

7.2.6.1.2. Sub frame

7.2.6.1.3. Chassis legs

7.2.6.1.4. Mounting points – Upgrading an existing fixture of the OEM body structure to a tubular chassis section (front or rear) will result the car moving to Superclass

7.2.6.2. The following upgrades are permitted

7.2.6.2.1. Camber arms / plates

7.2.6.2.2. Caster arms/ bushes

7.2.6.2.3. Upgraded struts / Coil overs

7.2.6.2.4. Sway bars

7.2.6.2.5. Bushes

7.2.6.2.6. Linkages

Changes to the vehicle that are outside these guidelines will be discussed with the technical committee for clarification on classing

7.2.7. Fueling and Fluids

7.2.7.1. Pump fuel and race fuel is allowed

7.2.7.2. Fuel additives are allowed

7.2.7.3. Ethanol fueled cars are allowed

7.2.7.4. Water methanol injection kits are allowed

7.2.7.5. No methanol fueled cars will be allowed

7.2.8. Other

7.2.8.1. Fuel cells

7.2.8.2. Relocated suspension points

7.2.8.3. Lexan/Polycarbonate windows

7.2.8.3.1. Perspex as a window material is prohibited under all conditions

new section

8. Super Class

8.1. Super Class A

Super Class by definition is for production road/race cars.

8.1.1. Engine modifications

8.1.1.1. All Naturally Aspirated (N/A) Motors

8.1.1.2. Forced induction (FI) motor combinations

8.1.1.3. Engine Modifications will remain open which includes the following:

8.1.1.3.1. Aftermarket turbo charges may be fitted

8.1.1.3.2. Nitrous Oxide may be fitted

8.1.1.3.3. Super chargers may be fitted

8.1.2. Tyres

8.1.2.1. Tyre size will be unlimited in width

8.1.2.2. Road tyres and semi slick tyres are permitted

8.1.2.3. NO slick tyres permitted

8.1.2.3. Semi slick tyres that are permitted must be readily available for every competitor to use in a range of sizes.

8.1.2.4. No special import tyres and/or vehicle specific tyres are allowed. Tyres with low or no tread, cords or steel belts showing or obvious leaks and/or punctures are not allowed on track

8.1.3. Interior

8.1.3.1. Partial or full removal of the interior is permitted.

8.1.3.2. Vehicle must retain a functioning dashboard.

8.1.3.3. All instrumentation to be securely mounted/secured.

8.1.4. Exterior

8.1.4.1. No limitation on exterior body panels

8.1.4.2. All body panels must be properly secured with suitable fasteners

8.1.5. Brake upgrade

8.1.5.1. Minimum of four-wheel brakes required.

8.1.5.2. No limitation on brake upgrades

8.1.6. Suspension

No limitation on upgrades which includes the following

8.1.6.1. OEM geometry

8.1.6.2. Sub frame

8.1.6.3. Chassis legs

8.1.6.4. Mounting points – Upgrading an existing fixture of the OEM body structure to a tubular chassis section (front or rear)

8.1.6.5. Camber arms / plates

8.1.6.6. Caster arms/ bushes

8.1.6.7. Upgraded struts / Coil overs

8.1.6.8. Sway bars

8.1.6.9. Bushes

8.1.6.10. Linkages

8.1.7. Fuelling and Fluids

Fuelling of cars should be done in proper areas, with adequate measures for safety, and from approved containers. Fire extinguishers shall be present and in a readily accessible location during any refuelling from containers.

8.1.7.1. Pump fuel and race fuel is allowed

8.1.7.2. Fuel additives are allowed

8.1.7.3. Ethanol fuelled cars are allowed

8.1.7.4. Water methanol injection kits are allowed

8.1.7.5. No methanol fuelled cars will be allowed

8.1.8. Other

Modifications that are not covered by the subsequent sections on the vehicle that substitutes an OEM part that is accepted

8.1.8.1. Fuel cells

8.1.8.2. Relocated suspension points

8.1.8.3. Lexan/Polycarbonate windows.

8.1.8.4. Perspex as a window material is prohibited under all conditions.

8.2. Super Class B

Super Class B in intended for “budget race cars”

8.2.1. Engine modifications

8.2.1.1. All Naturally Aspirated (N/A) Motors

8.2.1.2. Engine Modifications will remain open

8.2.1.3. Forced induction (FI) motor combinations under 1900cc

8.2.2. Tyres

8.2.2.1. Tyre size will be limited in width to 265 wide

8.2.2.2. Road tyres and semi slick tyres are permitted

8.2.2.3. NO slick tyres permitted

8.2.2.4. Semi slick tyres that are permitted must be readily available for every competitor to use in a range of sizes

8.2.2.5. No special import tyres and/or vehicle specific tyres are allowed. Tyres with low or no tread, cords or steel belts showing or obvious leaks and/or punctures are not allowed on track

8.2.3. Interior

8.2.3.1. Partial or full removal of the interior is permitted

8.2.3.2. Vehicle must retain a functioning dashboard

8.2.3.3. All instrumentation to be securely mounted/secured

8.2.4. Exterior

8.2.4.1. No limitation on exterior body panels

8.2.4.2. All body panels must be properly secured with suitable fasteners

8.2.5. Brake upgrade

8.2.5.1. Minimum of four-wheel brakes required

8.2.5.2. No limitation on brake upgrades

8.2.6. Suspension

8.2.6.1. No limitation on upgrades which includes the following

8.2.6.2. OEM geometry

8.2.6.3. Sub frame

8.2.6.4. Chassis legs

8.2.6.5. Mounting points – Upgrading an existing fixture of the OEM body structure to a tubular chassis section (front or rear)

8.2.6.6. Camber arms / plates

8.2.6.7. Caster arms/ bushes

8.2.6.8. Upgraded struts / Coil overs

8.2.6.9. Sway bars

8.2.6.10. Bushes

8.2.6.11. Linkages

8.2.7. Fueling and Fluids

8.2.7.1. Pump fuel and race fuel is allowed

8.2.7.2. Fuel additives are allowed

8.2.7.3. Ethanol fueled cars are allowed

8.2.7.4. Water methanol injection kits are allowed

8.2.7.5. No methanol fueled cars will be allowed

8.2.8. Other

Modifications that are not covered by the subsequent sections on the vehicle that substitutes an OEM part that is accepted

8.2.8.1. Fuel cells

8..2.8.2. Relocated suspension points

8.2.8.3. Lexan/Polycarbonate windows

8.2.8.4. Perspex as a window material is prohibited under all conditions

9. Unlimited Class

9.1. Engine modifications

No Limit on engine modifications

9.2. Tyres

9.2.1. Tyre size will be unlimited in width

9.2.2. Slick tyres permitted

9.2.3. Tyres that are permitted must be readily available for every competitor to use in a range of sizes.

9.2.4. No special import tyres and/or vehicle specific tyres are allowed. Tyres with low or no tread, cords or steel belts showing or obvious leaks and/or punctures are not allowed on track

9.2. Interior

9.2.1. Vehicle must retain a functioning dashboard.

9.2.2. All instrumentation to be securely mounted/secured.

9.3. Exterior

9.3.1. No limitation on exterior body panels

9.3.2. All body panels must be properly secured with suitable fasteners

9.4. Brake upgrade

9.4.1. Minimum of four-wheel brakes required

9.4.2. No limitation on brake upgrades

9.5. Suspension

9.5.1. No limitation on suspension

9.6. Fueling and Fluids

9.6.1. Pump fuel and race fuel is allowed

9.6.2. Fuel additives are allowed

9.6.3.Ethanol fueled cars are allowed

9.6.4. Water methanol injection kits are allowed

9.6.5.. No methanol fueled cars will be allowed

9.7. Other

Modifications that are not covered by the subsequent sections on the vehicle that substitutes an OEM part that is accepted

9.7.1. Fuel cells

9.7.2. Relocated suspension points

9.7.3. Lexan/Polycarbonate windows

9.7.4. Perspex as a window material is prohibited under all conditions.

10. Points scoring system

10.1. Competitors are only eligible to score full championship points if the vehicle driven at the event(s) is the same as the registered vehicle

10.2. You are only eligible to score points from the date of registration – no back dated results will be added Points scoring structure will be the same for each class and for the overall championship

10.3. Class championship points will be scored based on your position finished on the day in the class

10.4. Street Modified championship will be the combination of all Street and Modified Classes. Points will be scored based on your position finished on the day with Super Class cars and Daily Class cars removed from the results

10.5. Series Overall championship points will be scored on the overall position for the day with the daily class entries removed from the results

10.6. Moving class up or down (i.e., Street to modified and/or Super to Modified). Points will not be allowed to be carried over

10.7. In the event of a tie for a position the process of position will be

10.7.1. Highest amount of entered events

10.7.2. Highest position finished

10.7.3. Should 10.7.1 & 10.7.2 not be able to be a tie breaker, each competitors fastest lap time from each event will be added together to give a total time for the season. The least amount of time will then define the winner.

10.8. Point scoring for 2024 Drivers are allowed to share a car allowed under the following conditions that each driver

10.8.1. Has entered and paid individually

10.8.2. Only drives with the assigned transponder

10.8.3. only drives in the assigned track session

10.8.4. Should it be seen or reported that another competitor has swopped drivers without consent from the organizers and/or has another person drive his/her car, both drivers will be disqualified for the days racing and no points will be awarded.

10.9. Points allocation for each event

_2024 RULES AND REGULATIONS point scoring

10.9.2. 5 points will be awarded at the inspection event

10.9.3. 2 points will be awarded at each event for each competitor that competes and enters with Bridgestone tyres.

10.9.4. Drop points

10.9.4.1. Eligibility: Each competitor will be eligible to score points for all events in the championship.

10.9.4.2. Automatic Discard: Each competitor will automatically have their lowest scoring event discarded after the final event is complete.

10.9.4.3. Zero Points: The drop points system includes any event in which the competitor has scored 0 (zero) points.

10.9.4.4. Missed Events: The drop points system also includes any event that a competitor has missed.

10.10. Group / Session allocation for each event

10.10.1. Under no circumstance will a competitor be allowed on circuit in another allocated group. Unless instructed by the event organizer. This includes but not limited to:

10.10.1.1. Arriving to the event late

10.10.1.2. Arriving late to tech inspection

10.10.1.3. Missing your allocated group

10.10.1.4. Being held up in your allocated group

10.10.1.5. Taking passengers on circuit

10.10.1.6. Car problems

10.10.2. Only allocated session times will stand for the day results

10.10.3. If you are caught or attempting to go out in the incorrect group your fastest session for the day will be non-void.

10.10.4. Should the above offence be conducted twice – even at separate events, the result will be a disqualification for the days results

10.11. Impeding competitors

In the event of “Driver A” impeding “Driver B”, intentionally or unintentionally on “Driver A’s” cool down lap /out lap/ preparation lap – “Driver A’s” fastest lap time will be deleted for the day – this will be revived by the committee and only video evidence will be verified for the offence.

10.11.1. Overtaking on track – as stated in drivers briefing

10.11.1.1. Where overtaking is allowed

10.11.1.1.1. Overtaking must be done safely on the straights and not in the corners and/or otherwise stated in the drivers briefing

10.11.1.1.2. In the event that an overtake is deemed unsafe or dangerous – the impeding competitor will have his/hers fastest lap time deleted for the day – this will be reviewed by the committee and only video evidence will be verified for the offence.

10.11.2. Where overtaking is not allowed

10.11.2.1. Should a competitor overtake on track when stated in the drivers briefing it is not allowed the competitors fastest lap time for the day will be non-void.

10.11.2.2. Should the above offence be repeated for a second time, the competitor will be disqualified from the days results and no points will be awarded. The competitor will also not be allowed on circuit for the remainder of the day.

10.11.2.3. Exclusions for 7.12.2.1 & 2 is only applicable if the car being passed on circuit is stationary on the circuit.

11. Tech Inspection

Vilaca Racing does not make any representations as to the safety or mechanical condition of the vehicle. The responsibility of ensuring that the vehicle is safe and in proper mechanical condition to participate in the Event falls exclusively upon the Participant and his/her mechanic.

11.1. On-site tech inspection is REQUIRED, Vilaca Racing recommends all participants have a qualified mechanic inspect their car prior to the event, however, tech inspection will still be required for all cars (excluding instructors and staff) before the event. Failure to go through tech will result in forfeiting track time.

11.2. Vilaca Racing staff will go through regular tech inspection. Each participant must present a signed and completed inspection form, and will receive their run group sticker on a successful inspection

11.3. Participants shall bring their car to tech as it will be driven on track. This includes the tires and pads they will use on track.

114. All loose items should be out of the car, and helmet and any device that will be secured to the car during the event should be present and installed (camera mounts, etc). Participants must demonstrate that any device that will be attached to the car (inside or out) is secured properly. Any device secured to the outside of the car should also be checked by track staff prior to each session. Floor mats that are not pinned in must be removed, and glove boxes and storage areas must be emptied. If an item isn’t tied down, it should not be in the car.

11.5. If a participant knowingly has an issue with a car before or during the event, please inform the inspector as soon as possible. The participant should not continue to go out on track with any known issue. Doing so may result in a loss of track privileges, as well as potential lost track time for their run group due to track clean-up. Tracks can and will require drivers to pay for track damage. This includes, but is not limited to: fluid clean up on the track surface, damage to the barriers, and damage to the track facility. If participants are found to be knowingly tracking a car with a potentially dangerous issue, they will be asked to fix the issue before being allowed on track.

11.6. Tech inspection description

11.6.1. Lights

Functional brake lights (at least one easy to spot light at rear of car) must be on all cars and functional at all times or a car may be black flagged. Working headlights are mandatory for all cars during races occurring after dark. Any number of additional headlights may be used provided they are not deemed to be excessive or a hazard to other drivers. In night events, one headlight and one brake must be functioning at all times.

11.6.2. Fuel Tanks

Fuel tanks must be either OEM quality or better if using a factory style tank. Factory tanks are only permitted on cars where the tank is located behind the driver and in front of the rear wheels. Aftermarket fuel “cells” are allowed and encouraged, if properly installed and mounted. All structures holding the cell must be attached completely and entirely to the shell of the car and/or roll cage structure. Any cell deemed inadequate for competition will result in the car being denied entry. If participants have any questions on the legality or safety of a car’s fuel cell and system. All fuel lines must be isolated from the driver with either a metal bulkhead or shielding, and must be isolated from any sharp edges on sheet metal, etc.

11.6.3. Harnesses

All cars with roll bars or roll cages shall use 4 point-or-greater harnesses. Harnesses must be correctly installed, and all mounting points to sheet metal shall be adequately backed by large plates on opposite side of sheet metal.

11.6.4. Roll Cages

11.6.4.1. Roll cages must be quality, professional-level, and fully welded around all joints to be allowed on track. Roll cages are encouraged for all cars.

11.6.4.2. Bolt-in cages or roll bars must be professional quality, and must use adequate size spreader plates and backing plates on the underside of the car.

11.6.4.3. ‘Show cages’ are not allowed

11.6.5. Helmet inspection

Participant acknowledges that the inspection of Participant’s helmet by the organizers is for the sole purpose of determining whether the Participant’s helmet has met the minimum standards for usage

From a visual inspection to contain the appropriate Snell rating sticker or label and to be capable of meeting those standards at the present time.

Participant acknowledges that the organizers make no guarantee of fitness for use in “passing” Participant’s helmet, and that Participant is relying solely on Participant’s own judgment in using the helmet in the Event.

Participant indemnifies, acquits and forever discharges Vilaca Racing from any and all liability, claims, demands, or causes of action that arise from my wearing the inspected helmet, from Participant’s attendance at the Event, or from any injury sustained by Participant, regardless of their negligence.

Participant is over the age of 18 years, the Participant understands that he/she is participating in a dangerous activity, and that Participant’s helmet has not previously been worn in a collision, dropped, or struck by a hard object. Participant further acknowledges that the above conditions also apply to any helmet that Participant may borrow, and that Participant alone is responsible for Participant’s decision to wear a borrowed helmet

11.7. Basic Inpection list

Below is a basic list of issues that should be addressed prior to going to tech, or going on track. Please check for these issues throughout the event and correct them if they appear on a vehicle:

11.7.1. Corded tires, or tires rubbing on suspension arms/fenders

11.7.2. Loose lug nuts

11.7.3. Brake lights not working

11.7.4. Excessive play in the brake or clutch pedal

11.7.5. Play in the steering wheel

11.7.6. Loose bolts – please torque ALL bolts to spec before going through tech

11.7.7. Warped or cracked rotors

11.7.8. Fluid leaks of any kind (windshield washer fluid, oil, coolant, brake fluid, power steering fluid)

11.7.9. Hoses that can rub on sheet metal, causing damage or cuts in the hoses.

11.7.10. Brake pad thickness less than the recommended minimum thickness

11.7.11. Loose body panels/wings

11.7.12. Loose objects in the car

11.7.13. Low oil pressure, high coolant/water temperature

11.7.14. Frayed seat belts

11.7.15. Battery not tied down properly. TIE DOWNS MUST BE OEM OR BETTER QUALITY. Rubber or ratchet straps are not acceptable.

11.7.16. Exposed wiring, or wiring that can potentially rub on sheet metal in a damaging way to the wiring. General wiring, especially under hood, must be neat and secure in layout.

11.7.17. Lack of exhaust – You must have an exhaust, or at minimum, a b-pipe with a turn down. Excessively loud vehicles can and will be refused track-time. If you think your car is excessively loud, it very well might be. Please correct this with the use of a muffler or resonator.

11.8. Tech inspection failure

11.8.1. If any changes are required as a result of a tech inspection, participants must complete an additional inspection to ensure the changes are compliant. The inspector will be able to discuss why a car failed and may be able to give some recommendations on how to best address the issue.

11.8.2. Participants should ensure that they bring adequate tools. This is recommended for any track event, and will help ensure that they maximize track time. If a car cannot pass tech, it will not be allowed to drive on track. Complying with the safety rules and ensuring a car is in good mechanical condition will ensure that it will pass tech.

This is a firm rule, with no exceptions. Participants should go over every inch of their car prior to the event, and check all systems, bolts, and have quality and fresh fluids in their car. The responsibility of ensuring that the vehicle is safe and in proper mechanical condition to participate in the event falls exclusively upon the driver

Participant understands that Vilaca Racing collects, records, publishes, posts, transmits, and displays audio/visual “media” (images, recordings, videos, and other media).

With this understanding, Participant gives permission for media of Participant, to be collected, recorded (on film or otherwise), published, posted, displayed and transmitted by Vilaca Racing for any purpose. Participant hereby voluntarily releases and hold harmless Vilaca Racing, its directors, employees, land owners, and agents acting officially or otherwise, from all manner of suits, actions, claims, demands, and liabilities which may arise from such media participation. This release applies to any and all media known, and hereafter devised, in perpetuity throughout the universe. Participant understands that all media remains the property of Vilaca Racing, and waives all rights to original media, copies of media, royalties, entitlements, payments, or any other compensation or quid pro benefits which might arise from Vilaca Racing’s acquisition, storage, display, publication, posting, or distribution of media of Participant as described herein.

Participant understands that this document constitutes a full and complete waiver of all possible claims of any nature whatsoever, including claims of negligence, personal injury or property loss, or damage, arising out of said media participation.

Emergency medical treatment permission

Participant understands that on occasions an emergency requiring medical treatment can develop. Participant hereby consents to receive medical treatment that may be deemed advisable and/or necessary in the event of injury, accident, and/or illness during the Event.

Participant understands and acknowledges that any/all medical treatment is for his/her own account.

Participant hereby warrants that Participant has read this Agreement carefully, understand its terms and conditions, acknowledge that Participant will be giving up substantial legal rights by signing it, and intends for Participant signature to serve as confirmation of Participant’s complete and unconditional acceptance of the terms, conditions and provisions of this Agreement. This Agreement represents the complete understanding between Participant and the Event Organizers regarding these issues and no oral representations, statements or inducements have been made apart from this Agreement. If any portion of this Agreement is held to be unenforceable, invalid or overly broad, Participant agrees that the remaining terms and provisions of this Agreement will continue in full legal force and effect. Participant further understands and agrees to abide by the Rules and Regulations attached, which is incorporated herein by this reference.

IN WITNESS WHEREOF, Vilaca Racing and Participant have executed this Agreement:

The Vilaca Racing Committee shall be the authority for control over all racing competitions within the Vilaca Racing Series. This rulebook has been established by the Race Committee and shall be referred to in all decisions.

This rulebook may be revised at any time; updates to the rules will be indicated with strike lines for removed wording, and red font for adding wording, such as this. All rule changes will be considered effective immediately unless otherwise noted. Certain events may include supplemental regulations which supersede rules contained here. The Vilaca Racing rulebook will be referred to in situations that may not be otherwise covered in this rulebook or any other supplemental regulations. All rules within this book, and any supplemental regulations, should be interpreted with logic and “spirit of intent.” Any input from a participant will be considered, but the ruling of the Race Committee of the event will be considered final. The Race Committee will only stop on-track operations for weather related reasons.